Energy audits
Find out what your site really consumes, hour by hour.
For corporate, industrial and multi‑site operations: measured consumption you can act on — either to size a system correctly or to cut the bill you already have without installing anything.
An audit stands on its own. No obligation to buy a system.
The situation now
You are managing a bill without knowing what creates it
The bill is the only data you have
One monthly figure tells you nothing about which equipment, shift or branch is responsible for it.
Branches can't be compared
Across multiple sites nobody can say which one is inefficient, so investment goes wherever the noise is loudest.
Every quote is sized on estimates
Without measurement, any system you buy is sized on assumptions — the root cause of most disappointing installations.
Measurement is the cheapest part of the project and the part that decides whether everything after it was money well spent.
How this system gets there
Measure, attribute, then decide
Step 1
Metering and logging on site
We measure consumption where it happens rather than working backwards from the invoice.
Step 2
Attribute the load
Consumption is broken down by equipment, area or shift, so the biggest contributors are named.
Step 3
Findings and options
You get what the site consumes, where it's wasted, and what each option would change — including doing nothing.
Step 4
Use it however you want
The audit is yours: as the basis for a system we design, for tender documents, or for internal action alone.
Not sure yet?
That's normal. A power system is a big investment, so here are the questions clients ask most before they commit, and what we do about each one.
You might be thinking
“Is this just a sales exercise?”
What we do
The audit is a deliverable, not a pitch
Where the finding is 'change how you operate, don't buy equipment', that's what the report says.
You might be thinking
“Will it disrupt production?”
What we do
Metering is non‑intrusive and scheduled with you
Access and any switching windows are agreed before the work starts.
You might be thinking
“Do we have to act on it?”
What we do
No — the findings are yours either way
You can act on it internally, put it out to tender, or ask us to design from it.
Measure it before you spend on it
Tell us the site or the branches and what the bill looks like now. We audit consumption, attribute it, and give you the findings with the options.
Often considered alongside
Start with the list of what you need to keep running
Send us the equipment and how long you need it to run without mains power. We do the load assessment, design the system and come back to you with a proposal and a quote.